Image Processing-Based Non-Metallic Inclusion Detection Framework with Extreme Value Distribution
Author(s) : EDIZ POLAT, HUSEYIN AYDILEK
Abstract: Non-metallic inclusions are one of the main
problems in steel industry. They are formed by chemical
reactions during the steel production process. Non-metallic
inclusions have negative effects on mechanical properties of steel.
Thus, the detection and the classification of them are very
importa... Read More
Keywords: Image Processing, Non-metallic inclusions, Gumbel, Extreme Value Distribution.
Conference Title : Third International Conference on Advances in Information Processing and Communication Technology - IPCT 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 2
Page(s) : 48 - 52
Electronic ISBN : 978-1-63248-077-4
Views : 626 | Download(s) : 137
Braking Efficiency Estimation Of An Automobile Vehicle Based On Predictive Parameters
Author(s) : A.M. GOMEZ, B. BOADA, M.J. BOADA, OLMEDA, E., S. SANZ, V. DIAZ
Abstract: For the evaluation of the effectiveness of the
brake system, most countries have a system of technical review.
The test of brake inspection is done on a machine called brake
tester. This checkpoint is uncomfortable for the user and it
consumes some time of inspection that results in longer waiti... Read More
Keywords: braking force, automobile, itv, prediction
Conference Title : Third International Conference on Advances in Mechanical and Automation Engineering - MAE 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 6
Page(s) : 20 - 24
Electronic ISBN : 978-1-63248-080-4
Views : 706 | Download(s) : 136
An Online Changepoint Detection Algorithm for Highly Correlated Data
Author(s) : SEPEHR MALEKI, CHRIS BINGHAM, YU ZHANG
Abstract: An online 2-D changepoint detection algorithm
for sensor-based fault detection, is proposed. The algorithm
consists of a differential detector and a standard detector and
can detect anomalies and meaningful changepoints while
maintaining a low false-alarm rate. A new approach for
determining a ... Read More
Keywords: Fault Detection, FDI, Changepoint Detection
Conference Title : Third International Conference on Advances in Information Processing and Communication Technology - IPCT 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 1
Page(s) : 43 - 47
Electronic ISBN : 978-1-63248-077-4
Views : 620 | Download(s) : 108
Effect of adsorption to desorption air mass ratio on the performance of double bed desiccant dehumidification system
Author(s) : Y.A.F. EL-SAMADONY
Abstract: In the present work, experimental investigation
of the performance of double bed desiccant dehumidification
system has been carried out. The two desiccant beds operate
simultaneously. When one of the two beds functions as an
adsorber, the second operates as a regenerator. In this
investigation,... Read More
Keywords: Desiccant, Dehumidification, Adsorption, Regeneration, Silica gel
Conference Title : Third International Conference on Advances in Mechanical and Automation Engineering - MAE 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 1
Page(s) : 15 - 19
Electronic ISBN : 978-1-63248-080-4
Views : 666 | Download(s) : 160
Effect of PV Orientation on Energy Generation and Economy: A Case Study for Istanbul-Turkey
Author(s) : ALI DURUSU, ALI ERDUMAN, MUGDESEM TANRIOVEN
Abstract: This analysis consider the effect of azimuth angle
of fixed photovoltaic (PV) system on energy generation of PV
system. Detailed PV production model, including effect of solar
radiation, temperature and wind speed, was used to calculate
output of PV array for different azimuth angles of PV array... Read More
Keywords: economic value, effect of orientation, energy generation, PV array
Conference Title : Third International Conference on Advances in Mechanical and Automation Engineering - MAE 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 3
Page(s) : 11 - 14
Electronic ISBN : 978-1-63248-080-4
Views : 603 | Download(s) : 126
Designing and Performing of Serum Flow Rate by Microcontroller
Author(s) : FECIR DURAN, M. RAHMI CANAL, MERAL OZARSLAN YATAK, SABRI KOCER, SERDAL GUVENC
Abstract: Drug injection together with serum to vessel of
patient is one of drug treatment (medication) methods. In this
method it is necessary that drug must be given on the certain
frequencies and within certain dosages during treatment to
patient. Therefore serum should be injected to patient by very
... Read More
Keywords: Microcontroller, drug treatment, drop counting method, serum flow rate.
Conference Title : Third International Conference on Advances in Information Processing and Communication Technology - IPCT 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 5
Page(s) : 38 - 42
Electronic ISBN : 978-1-63248-077-4
Views : 703 | Download(s) : 146
Sizing of PV Based LED Lighting System Considering Minimum Solar Radiation Level
Author(s) : ALI AJDER, HAKAN AKCA, HUSEYIN AKDEMIR, ISMAIL NAKIR, MUGDESEM TANRIOVEN, RAMAZAN AYAZ
Abstract: Solar- LED outdoor lighting system allows
governments to illuminate remote areas without electric
network. For these systems a battery is required to store energy
from PV panel during the sunshine and supply the LED light
during the night. This paper presents simple analytic procedure
for optim... Read More
Keywords: Battery sizing, LED outdoor lighting, Optimum tilt angle, Photovoltaic systems
Conference Title : Third International Conference on Advances in Mechanical and Automation Engineering - MAE 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 6
Page(s) : 6 - 10
Electronic ISBN : 978-1-63248-080-4
Views : 599 | Download(s) : 158
Investigation of neutral axis Shifting and wall thickness Distribution of bent tubes Produced by rotary draw bending
Author(s) : B. ENGEL, H. HASSAN
Abstract: Rotary draw bending is a method used for tube forming.
During the tube bending process, the neutral axis moves towards the
inner arc and the wall thickness changes in the cross section of the
tube. Wall thinning of the tube takes place at the extrados, whereas
wall thickening of the tube occurs ... Read More
Keywords: Rotary draw bending, thick-welled tube, material properties, material influence.
Conference Title : Third International Conference on Advances in Mechanical and Automation Engineering - MAE 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 2
Page(s) : 1 - 5
Electronic ISBN : 978-1-63248-080-4
Views : 722 | Download(s) : 204
Enhancing Software Piracy And Integrity Protection In Cloud Computing With TPM
Author(s) : ABOUELMEHDI KARIM, AHMED BENTAJER, EL AMRANI FATIMA ZOHRA, EL FEZAZI SAID, HEDABOU MUSTAPHA
Abstract: Software as a Service (SaaS) is a kind of *aaS
distribution and deployment model in which applications are
provided to customers as a service. The applications can run on
the user’s computing systems or the CSP’s Web servers. The
solution may belong to a software company, which host it
amon... Read More
Keywords: SaaS, IaaS, TPM, Trust Computing
Conference Title : Third International Conference on Advances in Information Processing and Communication Technology - IPCT 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 5
Page(s) : 33 - 37
Electronic ISBN : 978-1-63248-077-4
Views : 613 | Download(s) : 191
Comprehensive State of the Art of Bio-Inspired Routing in Mobile Ad-Hoc Networks
Author(s) : AKRAM KOUT, SAID LABED, SALIM CHIKHI
Abstract: In this paper we discuss different biologically
inspired routing protocols for Mobile Ad-hoc NETworks
(MANETs) and the influence it has on the Quality of Service
(QoS) in the system. Bio-inspired routing protocols have made
the main focus of the contributions to the field of mobile ad-hoc
NETwo... Read More
Keywords: Mobile Ad-hoc Networks, Bio-inspired routing, QoS.
Conference Title : Third International Conference on Advances in Information Processing and Communication Technology - IPCT 2015
Conference Date(s) : 2015-12-11
Place : Hotel Novotel Roma La Rustica, Rome, Italy
No fo Author(s) : 3
Page(s) : 27 - 32
Electronic ISBN : 978-1-63248-077-4
Views : 588 | Download(s) : 195
UPCOMING CONFERENCES
RECENTLY VIEWED PUBLICATIONS
- International Conference on Advances in Electronics Devices and Circuits - EDC 2012
- Second International Conference on Advances in Mechanical and Robotics Engineering- AMRE 2014
- International Conference on Advances in Social Science, Economics and Management Study - SEM 2014
- International Conference on Advances in Computing, Electronics and Communication - ACEC 2013
- Seventh International Conference on Advances in Civil, Structural and Environmental Engineering-ACSEE 2018