Browse by year :
(592) Papers Found

The Effect of Deep and Shallow Cryogenic Treated Wire Electrodes on the Performance Characteristics of WEDM

Author(s) : JATINDER KAPOOR, SEHIJPAL SINGH
Abstract: This paper describe the effect of deep and shallow cryogenic treated brass wire electrodes on the material removal rate (MRR) and the surface roughness (SR) of an EN-31 steel machined by WEDM. Full factorial experimental design strategy is used in the experimentation. Three process parameters, namel...     Read More
Keywords: WEDM, Brass wire, Cryogenic treated wire, Surface roughness
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 2
Page(s) : 66 - 70
Electronic ISBN : 978-981-07-7965-8
Views : 919   |   Download(s) : 155

A Framework of Integrating an RFID-enabled Communication System into an Automated Storage and Retrieval Mechanism

Author(s) : HONGWEI WANG, MISHA FILIP, NICK BENNETT  , QIAN WANG
Abstract: A typical automated warehousing system consists of automatic storage and retrieval modules including lifting equipment and powered conveyor systems. These facilities are used to overcome some disadvantages of manually operated warehousing systems which often lead to a high frequency of human errors,...     Read More
Keywords: automation, warehouses, RFIDs, inventory, management, systems integration
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 4
Page(s) : 62 - 65
Electronic ISBN : 978-981-07-7965-8
Views : 915   |   Download(s) : 154

Impact of Ball-Screw Pre-loading on Thermal Behavior Simulation of Vertical Machining Center During End-Milling Operation

Author(s) : P GANESAN, P R THYLA, SUNILKUMAR S HONNUNGAR, V PRABHU RAJA
Abstract: Thermal drift at tool centre point (TCP) is caused mainly due to positional errors in feed drive system of machine tool. The important sources of these errors are frictional heat generated at contact areas such as ball screw-nut, bearing races and balls. In addition to this, heat losses of motor als...     Read More
Keywords:
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 4
Page(s) : 55 - 61
Electronic ISBN : 978-981-07-7965-8
Views : 945   |   Download(s) : 123

A Hybrid and Efficient Adaptive Cartesian Grid for Simulation of Unsteady Flow in Aerodynamics Applications

Author(s) : ALIREZA JAHANGIRIAN, MIR YOSEPH HASHEMI, NIMA MOLANI  
Abstract: A Hybrid Grid Generation Method that combines the computational efficiency of the Cartesian grid and the flexibility of the meshless strategy is developed for computation of the compressible invicid flows over general geometries and moving boundary applications. The meshless zone is created around t...     Read More
Keywords: Adaptive Cartesian Grid, Moving Boundary, MeshLess Method
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 3
Page(s) : 48 - 54
Electronic ISBN : 978-981-07-7965-8
Views : 938   |   Download(s) : 138

A Systematic Strategy to Find the Natural Frequencies of an Industrial Robot

Author(s) : ALAA ABDULHADY JABER, ROBERT BICKER
Abstract: In order to design a reliable monitoring or control system for any machine, some characteristics of the machine have to be known, such as machine natural frequencies. In this paper, firstly static evaluation of the PUMA 560 robot, which has been used in this research study, when it is powered on, wa...     Read More
Keywords: industrial robot, frequency response analysis, natural frequencies
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 2
Page(s) : 42 - 47
Electronic ISBN : 978-981-07-7965-8
Views : 957   |   Download(s) : 212

Simulation of Cyclic Stress-Strain Behavior of S960 at Weld Toe by means of Finite Element Method

Author(s) : MOHAMMAD DABIRI, TIMO BJORK
Abstract: The cyclic stress-strain response of S960 at the toe of fillet-welded joint has been simulated by means of finite element method in order to gathering the needed data for fatigue life prediction process. The Femap software (Version 11.0.0) with NX Nastran 8.5 as its solver has been used in this simu...     Read More
Keywords: Cumulative damage fatigue; Numerical simulation; Cyclic stress-strain curve; Softening; Weld toe; Ultra high strength steel
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 2
Page(s) : 37 - 41
Electronic ISBN : 978-981-07-7965-8
Views : 976   |   Download(s) : 230

Quality Function Deployment Applying Structural Model

Author(s) : TAKEO KATO
Abstract: Sharing the product information between the product development members has been important due to the product diversification and complication. Quality Function Deployment (QFD) is an effective method to share the information of the product via the quality matrices that describes the relationship be...     Read More
Keywords: design theory and methodology, Quality function deployment, Interpretive structural modeling
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 1
Page(s) : 31 - 36
Electronic ISBN : 978-981-07-7965-8
Views : 951   |   Download(s) : 209

Aerodynamic Performance of Twist Morphing MAV Wing

Author(s) : A.H. ZULKIFLI, M.HISYAM BASRI , M.Z. ABDULLAH, N.I. ISMAIL  , NORAZHARUDDIN SHAH ABDULLAH
Abstract: Twisted wing (TW) is a morphing technique that particularly suitable for a membrane wings MAV. However, the aerodynamic advantages of TW application on MAV wing scale are still needed to be explored. This is because the MAV design challenge is still concentrated in generating enough lift during flig...     Read More
Keywords: Fluid structure interaction; micro air vehicle; twist morphing wing
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 5
Page(s) : 26 - 30
Electronic ISBN : 978-981-07-7965-8
Views : 990   |   Download(s) : 214

Electromyogram as a Viable Direct Human Input for Human Machine Interfaces Interface Design with Case Studies

Author(s) : G SAJAYSURYA, J SURESH KUMAAR, K PRAKASAN, M MADHU
Abstract: Direct Human Input (DHI) is an input methodology for Human Machine Interfaces (HMI). Use of DHI eliminates physical input devices as input data is collected directly from the signals generated by the human body. Various varieties of DHI exists of which Electromyogram (EMG) is found to have propertie...     Read More
Keywords: Human Computer Interface, Direct Human Input, Electromyogram, Facial Expressions
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 4
Page(s) : 21 - 25
Electronic ISBN : 978-981-07-7965-8
Views : 991   |   Download(s) : 146

Basic Study on Optimization of Seat Angles for Lower Limb Blood Flow

Author(s) : DAISUKE SANNAN, HIROMU HASHIMOTO, SAORI SONE, TAKEO KATO, YOSHIYUKI MATSUOKA
Abstract: In recent years, desk workers sitting in a chair for many hours have some problems: swelling of lower limbs, congestion, pressure ulcer and etc. This study aims to clarify the optimal seat angles. For this aim, the changes in lower limb blood flow causing these symptoms were measured to each combina...     Read More
Keywords: ergonomic design, lower limb blood flow, seat, shear force
Conference Title : International Conference on Advances in Mechanical and Robotics Engineering - AMRE 2013
Conference Date(s) : 2013-10-13
Place : Hotel Novotel Zurich West, Zurich, Switzerland
No fo Author(s) : 5
Page(s) : 17 - 20
Electronic ISBN : 978-981-07-7965-8
Views : 974   |   Download(s) : 176